Adaptive’s low-profile channel style beam clamps anchor permanently to structural I-Beams and provide a safe, predictable method for suspending loads from overhead.
Adaptive’s low-profile channel style beam clamps anchor permanently to structural I-Beams and provide a safe, predictable method for suspending loads from overhead.
The Gimbaled Overhead Structural Attach Points is unique in that it offers a gimbaled swivel eye that accommodates up to 20 degrees of off-axis side loading in any direction without losing any of its working load.
This design is adjustable and mounts flush underneath the building’s I-Beam’s flange. Use the BC-2824-SERIES hook style beam clamp to provide a load rated overhead rigging point from structural I-Beams with widths ranging from 2″ and 6″, 6″ and 9″ or 9″ and 12″.
These designs secure to a building’s overhead structural beams, steel or wood, for widths ranging from 3.0” to 12.0” (76 to 305 mm) wide. It’s lower suspension arm comes in a variety of lengths to suit the needs of the installation and rotates 360 degrees for precise aiming.
These designs secure to a building’s overhead structural wood beams for widths ranging from 5.25″ to 11.25″ (133.35 to 285.75 mm) wide. A wide range of mounts and configurations can be created utilizing the wood beam clamp models.
The scissor design secures to the I-Beams flanges and accommodates 1/2 to 13 threaded rod or eyebolt for suspension. This design gets stronger as the applied weight increases.
Quote Cart
