01 · Build
Assemble the strut frame
Lay out the contractor-supplied strut and align using StrutWall mounting hardware.
Vertical struts are optional.
Source standard strut channel locally, then use Adaptive’s purpose-built components to configure an aligned, serviceable frame around virtually any size flat screen.
Contractor-supplied strut channel and Adaptive’s adjustable hardware create a modular frame that can be reconfigured if the LED wall size changes.
Vertical struts are optional.
Experiment with different LED cabinet sizes and video wall configurations until you find the right match. Then add the selected configuration to the Project Cart.
Enter these details once. They will remain connected to the StrutWall configuration throughout the Project Cart process.
Enter the cabinet dimensions and wall size. You can calculate different configurations before choosing what to add to the Project Cart.
Confirm the selected configuration, needed components, part numbers and quantities before adding it to the Project Cart.
| Needed component | Part number | Quantity |
|---|---|---|
 Left / Right LED Mount |
SW-LR-MNT-Z | — |
 Center LED Mount |
SW-CM-MNT-Z | — |
 Landing Bracket |
SW-LB-CSTM-Z | — |
 Horizontal Spacer |
SW-HS-CSTM-Z | — |
 End-to-End Joiner Bracket |
SW-E2E-BRKT-Z | — |
 Wall LevelerCustomer-selected quantity |
SW-WL-M-Z | Enter 0 if not needed. |
Enter the LED manufacturer and model you plan to use. Adaptive will review your selection for compatibility.
Purchase the strut listed below locally. These strut lengths and quantities are not included in your Project Cart.
Standard strut length: 3,050 mm (10′-0″ nominal). One vertical length per 1,200 mm (approximately 4′-0″) of horizontal length, with a minimum of two when used. Vertical struts are optional.
| Strut Purchase Planning | Full Lengths 3,050 mm each 10′-0″ nominal |
Cut Lengths | Cut length per piece |
|---|
Preliminary results for engineering review.
Review your configured Adaptive hardware in the Project Cart, then complete the project request below. Contractor-supplied strut remains separate.
Name, email and company are already carried forward. Only the remaining project and location details are requested here.
1 configured system
500 × 500 mm cabinets · Adaptive hardware and quantities only
Edit · Remove
Contact details carried forward
Build the strut frame, mount and align the cabinet frames, then install the LED panels.
Lay out the contractor-supplied strut and align using StrutWall mounting hardware.
Vertical struts are optional.
Set the LED cabinet frames onto the adjustable StrutWall mounts and establish LED alignment.
Complete the display after the cabinet structure has been aligned and secured.
Review the StrutWall components and open a dimensional drawing when additional detail is needed.
SW-LR-MNT-Z · INDOOR | SW-LR-MNT-S · OUTDOOR
Secures the outside mounting holes of the left and right LED cabinet columns.
SW-CM-MNT-Z · INDOOR | SW-CM-MNT-S · OUTDOOR
Secures cabinet mounting points between columns and provides X, Y and Z adjustment.
SW-HS-CSTM-Z · INDOOR | SW-HS-CSTM-S · OUTDOOR
Sets the model-specific distance between horizontal struts and helps keep them parallel.
SW-E2E-BRKT-Z · INDOOR | SW-E2E-BRKT-S · OUTDOOR
Joins strut channels for larger frames longer than 10 feet (3050 mm).
SW-LB-CSTM-Z · INDOOR | SW-LB-CSTM-S · OUTDOOR
Helps establish and align the first, bottom tier of LED cabinets.
SW-WL-M-Z · INDOOR | SW-WL-M-S · OUTDOOR
Floats the strut frame over uneven wall surfaces with up to 3/4-inch adjustment.
| Application | Modular framing for flat, serviceable LED video walls of virtually any size |
|---|---|
| Compatible strut channel | To be used with standard 7/8-inch and 1-5/8-inch strut channel. Select the lower-profile 7/8-inch strut to position the LEDs closer to the structural wall. |
| Indoor construction | Steel; zinc-plated finish; silver color |
| Outdoor construction | Stainless steel; passivated finish; silver color |
| LED adjustments | X, Y and Z alignment through adjustable left/right and center mounts |
| Recommended LED style | Serviceable, front-access LED cabinets
|
| Strut sections | Strut channel supplied by the installing contractor |
Project Cart