Beam Clamp – BC7-12-2
7 to 12 inch Dual Hang Point

Use the BC7-12-2 channel style beam clamp to provide an offset load rated overhead rigging point from structural I-Beams with flange widths ranging between 7” and 12” (178-305mm). This beam clamp model provides a fast, easy and safe way to rig direct loads, bridles and hitches. A hand wrench is all that is required to secure the clamp to the beam. Beam flanges must be parallel to the floor to achieve the stated safe working loads.

NOTE: Recommended torque = 40-50 ft/lb